Prosecution Insights
Last updated: November 20, 2026
Application No. 18/886,695

METHOD OF MAKING HEAT EXCHANGER

Non-Final OA §112
Filed
Sep 16, 2024
Examiner
TRAVERS, MATTHEW P
Art Unit
3725
Tech Center
3700 — Mechanical Engineering & Manufacturing
Assignee
RTX Corporation
OA Round
1 (Non-Final)
64%
Grant Probability
Moderate
1-2
OA Rounds
5m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 64% of resolved cases
64%
Career Allowance Rate
428 granted / 674 resolved
-6.5% vs TC avg
Strong +43% interview lift
Without
With
+43.3%
Interview Lift
resolved cases with interview
Typical timeline
2y 8m
Avg Prosecution
36 currently pending
Career history
734
Total Applications
across all art units

Statute-Specific Performance

§101
0.3%
-39.7% vs TC avg
§103
44.7%
+4.7% vs TC avg
§102
17.2%
-22.8% vs TC avg
§112
32.3%
-7.7% vs TC avg
Black line = Tech Center average estimate • Based on career data from 674 resolved cases

Office Action

§112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Election/Restrictions Applicant's election with traverse of Group I (claims 1-13) in the reply filed on 5/11/2026 is acknowledged. The traversal is on the ground(s) that “there is no showing that there would be a serious search burden if the apparatus claims were also examined”. This is not found persuasive because Applicant has not particular pointed out where or how the requirement is flawed. The original requirement described how the claim groupings are distinct and stated why there would be burden to search both groups. The requirement is still deemed proper and is therefore made FINAL. Drawings The drawings are objected to as failing to comply with 37 CFR 1.84(p)(4) because reference character “103” has been used to designate both the outlet tube and the wall (see e.g. paragraph 50 and 52; Figs. 2A-2B and 4). Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance. Specification Applicant is reminded of the proper language and format for an abstract of the disclosure. The abstract should be in narrative form and generally limited to a single paragraph on a separate sheet within the range of 50 to 150 words in length. The abstract should describe the disclosure sufficiently to assist readers in deciding whether there is a need for consulting the full patent text for details. The abstract of the disclosure is objected to because it exceeds 50 words in length. A corrected abstract of the disclosure is required and must be presented on a separate sheet, apart from any other text. See MPEP § 608.01(b). The disclosure is objected to because of the following informalities: The specification uses reference character “103” to designate both the outlet tube and the wall (see e.g. paragraph 50 and 52) Appropriate correction is required. Claim Objections Claim 1 is objected to because of the following informalities: Claim 1 recites “cutting access opening” in line 10, but should be amended to recite --cutting access openings-- Appropriate correction is required. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 1-13 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Claim 1 recites the limitation "the inner wall" in line 4. There is insufficient antecedent basis for this limitation in the claim. It appears that this should instead recite --the wall--. Claim 1 recites “the heat transfer tubes having a hollow interior” in lines 4-5. It is unclear of this is reciting a single interior for multiple tubes or that each tube has an interior. It appears that this should instead recite --the heat transfer tubes each having a hollow interior--. In view of the above, references to the “interior” of the heat transfer tubes should be amended to refer to --interiors--. Claim 1 recites “the outlet header formed at an opposed end of the inlet header” in lines 7-8. This is somewhat misleading in view of the disclosure, as the outlet header is not really formed at any end of the inlet header, and thus it is unclear specifically what the limitation is attempting to describe. It appears that this should instead recite, for example, --the outlet header formed at an opposed end of the heat transfer tubes from of the inlet header--. Claim 2 recites “the cutting step”. It is unclear to which this refers as there are effectively two cutting steps (cutting access opening[s] and cutting through an opposed side of the wall) in claim 1. Claim 8 recites the limitation "the melt pool" in line 2. There is insufficient antecedent basis for this limitation in the claim. The remaining claims are rejected by virtue of their dependency on at least claim 1. Allowable Subject Matter Claims 1-13 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action. The following is a statement of reasons for the indication of allowable subject matter: U.S. PGPub 2011/0290464 (cited in the IDS) discloses a method wherein access openings 46 are provided in the header in a wall opposite to the tube orifices to allow for insertion of assembly tools for assembly of the tubes into the pre-existing orifices. The access openings are not used to cut the tube orifices and there is no apparent motivation to assemble the tubes to the header with the hollow interior of the inlet header being blocked from communication with the hollow interiors of the heat transfer tubes prior to cutting. U.S. Patent 6,155,339 and U.S. PGPub 2003/0006029 are similar to the above. 2016/0116230 discloses a similar technique as claimed used to connect chambers of adjacent parallel extruded manifold tubes as opposed to creating communication between heat transfer tubes and a manifold. An access port (226) is drilled into a wall of one manifold, and a fluid communication port 230 is then drilled via the access port, followed by plugging the access port. The method does not involve forming a fluid connecting between heat transfer tubes of a diameter smaller than a diameter of the inlet header an extending away from the inner wall of the inlet header and outlet header, nor would it necessarily apply to such an arrangement since the method is drawn to forming fluid connection between co-extruded parallel manifold tubes. KR20090041111 is similar to 2016/0116230. Contact Information Any inquiry concerning this communication or earlier communications from the examiner should be directed to MATTHEW P TRAVERS whose telephone number is (571)272-3218. The examiner can normally be reached 10:00AM-6:30PM. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Sunil K. Singh can be reached at 571-272-3460. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /Matthew P Travers/Primary Examiner, Art Unit 3726
Read full office action

Prosecution Timeline

Sep 16, 2024
Application Filed
Sep 29, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12779558
Drill Blade for Drilling Hard Materials and Drill Bit
3y 4m to grant Granted Nov 03, 2026
Patent 12773738
METHOD OF MACHINING HOLES AND CHAMFERS IN CERAMIC MATRIX COMPOSITES
3y 3m to grant Granted Oct 27, 2026
Patent 12768280
SEAL ASSEMBLY AND METHOD OF MANUFACTURING
1y 8m to grant Granted Oct 20, 2026
Patent 12746610
FLUID-TIGHT SEPARATING CLOSURE
4y 8m to grant Granted Sep 29, 2026
Patent 12741350
MACHINE TOOL
3y 2m to grant Granted Sep 22, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
64%
Grant Probability
99%
With Interview (+43.3%)
2y 8m (~5m remaining)
Median Time to Grant
Low
PTA Risk
Based on 674 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month