DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Claim Status
Claims 1-14, 17-21 are pending and examined on the merits.
Claims 20-21 are currently amended.
Specification
The disclosure is objected to because of the following informalities:
The specification fails to recite deposit accession information (pages 3-8, 15, 17, 25, 28, 33, and 41-42).
The specification fails to recite breeding history (see lack of written description rejection below).
Appropriate correction is required.
Applicant is reminded of The Duty of Candor and Good Faith. 37 C.F.R. 1.56.
Response to Arguments – Specification
Applicant's arguments filed 29 July 2026 have been fully considered but they are not persuasive.
The specification still has the indicated deficiencies.
Claim Rejections - 35 USC § 112
Indefiniteness
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
Claims 1-14, 17-21 remain rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AIA the applicant regards as the invention.
The claims all directly or indirectly recite blanks where the deposit accession number should be. This is not a typical NCIMB accession number; thus, it appears that Applicant is using it as a placeholder for the real accession number. In the absence of the accession number, the metes and bounds of the claims cannot be determined.
Response to Arguments – Indefiniteness
Applicant's arguments filed 29 July 2026 have been fully considered but they are not persuasive.
The claims still fail to recite deposit information.
Lack of Written Description – Breeding History
The following is a quotation of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
Claims 1-14, 17-21 remain rejected under 35 U.S.C 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement.
35 USC 112 (a) states that “The specification shall contain a written description of the invention”. In evaluating written description, the threshold question is what is “an adequate written description”. This is question of fact that is evaluated by the factfinder (examiner). MPEP 2163.04 clearly states that “The inquiry into whether the description requirement is met must be determined on a case-by-case basis and is a question of fact. In re Wertheim, 541 F.2d 257, 262, 191 USPQ 90, 96 (CCPA 1976).”
The instant invention is a new tomato variety (NUN 00343 TOP). So, the examiner will evaluate what is an adequate written description for a new tomato variety. In reviewing this question of fact, the examiner analyzed how plant varieties are evaluated in the public domain. The review concluded that generally the minimum requirements for an adequate description of a new plant variety has a trait descriptions and genetic information (via a breeding history). In reviewing applicant’s specification there is a phenotypic description as is seen in Tables 1 and 2. However, the provided breeding history in the specification in paragraph 175 is generic. There are no names of the parental varieties disclosed. Because the specification lacks a specific breeding history and that breeding history is part of the minimum description of a plant variety the applicant has not fulfilled the requirement of 35 USC 112(a) to provide a written description in the specification. The office’s reasonable basis for challenging the adequacy of written description is informed by a review of the following:
With regard to Plant Patents, MPEP 1605 states that a complete detailed description of a plant includes “the origin or parentage”.
A breeding history, including information about parentage and breeding methodology, is part of the requirements of Plant Variety Protection (PVP) applications. That information is used to “determine if development is sufficient to consider the variety new” (See “Applying for a Plant Variety Certificate of Protection”, USDA, https://www.ams.usda.gov/services/pv po/application-help/apply, downloaded 05/01/2023, (U)).
The International Union for the Protection of New Varieties of Plants (UPOV) considers breeding history and methodology part of its evaluation of essentially derived plant varieties (UPOV, Explanatory Notes on Essentially Derived Varieties Under the 1991 Act of the UPOV Convention, April 6, 2017, See UPOV EDV Explanatory Notes 14 and 30 (V)).
Historically, the USPTO has considered breeding history information when determining the patentability of a new plant variety. (See Ex Parte C (USPQ 2d 1492 (1992) (W) and Ex Parte McGowen Board Decision in Application 14/996,093, decided June 15, 2020 (X)). In both of these cases, there were many differences cited by the Applicant when comparing the prior art and the new plant variety. However, because the breeding history was available, these differences were deemed to be obvious and within the natural variation expected in a backcrossing breeding process. Without a breeding history in these cases, a complete comparison with the prior art could not have been possible.
As seen above in Ex Parte C and Ex Parte McGowan, a trait table is insufficient to differentiate varieties by itself. It has been long established that intracultivar heterogeneity exists in crop species. Haun et al. (Plant Physiology, Feb. 2011, Vol. 155, pp. 645-655 (Y)) teaches that the assumption that elite cultivars are composed of relatively homogenous genetic pools is false. (p. 645, left column). Segregation, recombination, DNA transposition, epigenetic processes, and spontaneous mutations are some of the reasons elite cultivar populations will maintain some degree of plant-to-plant variation (p. 645, right column and p. 646, left column). In addition to genetic variation, environmental variation may lead to phenotypic variation within a cultivar. (Großkinsky et al., J. Exp. Bot., Vol. 66, No. 11, pp. 5429-5440, 2015 (Z), p. 5430, left column, 1st full paragraph, and right column, 2nd full paragraph). In view of this variability, a breeding history is an essential and the least burdensome way to provide genetic information needed to adequately describe a newly developed plant.
The above factual evidence provides a reasonable basis that a breeding history is necessary written description. With this information the examiner has met the initial burden of presenting by a preponderance of evidence why a person of ordinary skill in the art would not recognize in an applicant’s disclosure a description of the invention defined by the claims. (See MPEP 2163.04). Please note, the citations above are not for legal authority, the legal authority relied upon by the examiner is the 35 USC 112(a) statute. The citations are presented to support the finding of fact that a breeding history is necessary to the adequate description of a plant.
Although not directly relied upon for the above written description position, a complete written description additionally helps drive examination and help with infringement verification.
MPEP 2163 (I) states “The written description of the deposited material needs to be as complete as possible because the examination for patentability proceeds solely on the basis of the written description. See, e.g., In re Lundak, 773 F.2d 1216, 227 USPQ 90 (Fed. Cir. 1985); see also 54 Fed. Reg. at 34,880 ("As a general rule, the more information that is provided about a particular deposited biological material, the better the examiner will be able to compare the identity and characteristics of the deposited biological material with the prior art.").”
MPEP 2163(I) states “The description must be sufficient to permit verification that the deposited biological material is in fact that disclosed. Once the patent issues, the description must be sufficient to aid in the resolution of questions of infringement." Id. at 34,880.)” (Quoting the Deposit of Biological Materials for Patent Purposes, Final Rule, 54 Fed. Reg. 34,864 (August 22, 1989) at 34,880).
The breeding history aids in the resolution of patent infringement by providing information necessary to determine whether differences in the plants are genetic differences, differences caused by the environment, or differences within the accepted variation within a variety.
Moreover, a specification devoid of a complete breeding history hampers the public’s ability to resolve infringement analysis with plants already in the prior art as well as plants that have not yet been patented. Because the instant specification lacks the complete breeding history, the public will not be able to fully resolve questions of infringement. Since the breeding history, including the parents, is not known to the public, the public could only rely on the phenotypes of the claimed plants for assessing potential infringement.
Thus, an application that does not clearly describe the breeding history does not provide an adequate written description of the invention.
To overcome this rejection, Applicant must amend the specification/drawing to provide the breeding history used to develop the instant cultivar. When identifying the breeding history, Applicant should identify any and all other potential names for all parental lines utilized in the development of the instant cultivar and all other potential names for the claimed cultivar. If Applicant’s breeding history uses proprietary cultivar names, Applicant should notate in the specification all other names of the proprietary cultivars, especially publicly disclosed or patented cultivar information. If the breeding history encompasses a locus conversion or a backcrossing process, Applicant should clearly indicate the recurrent parent and the donor plant and specifically name the trait or transgenic event that is being donated to the recurrent parent. If one of the parents is a backcross progeny or locus converted line of a publicly disclosed line, Applicant should provide the breeding history of the parent line as well (i.e., grandparents). Applicant should identify the breeding method used, such as single seed descent, bulk method, backcross method, etc., and the filial generation in which the instant plant was chosen. Information pertaining to the homozygosity or heterozygosity of the parents as well as the instant plant should be set forth.
Applicant is reminded that they have a duty to disclose information material to patentability. Applicant should also notate the most similar plants which should include any other plants created using similar breeding history (such as siblings of the instant cultivar). If there any patent applications or patents in which sibs or parents of the instant plant are claimed, the serial numbers and names of the sibs or parents should be disclosed. This information can be submitted in an IDS with a notation of the relevancy to the instant application or as information submitted as described in MPEP 724 (e.g., trade secret, proprietary, and Protective Order).
35 USC 112(a) clearly states “The specification (emphasis added) shall contain a written description of the invention”. In the instant application, the Specification fails to provide any breeding history. Moreover, the claims indicate Applicant intends to deposit seeds representative of the claimed cultivar. Thus, the claims are not directed to the deposited seeds or plants grown therefrom. The claims are directed to a genus of tomato plants and seeds that are genotypically and phenotypically different from the deposit, and have different traits from those disclosed in the specification. Given these differences, the complete breeding history for producing the claimed cultivar, including all names for the parents and for the claimed cultivar, are material for patentability. A specification devoid of a complete breeding history hampers the public’s ability to fully resolve questions of infringement.
Response to Arguments – Lack of Breeding History
Applicant's arguments filed 29 July 2026 have been fully considered but they are not persuasive.
The Examiner acknowledges two non-publicly available lines were crossed to make the instant hybrid. This still is not enough information for the Examiner to determine whether obviousness or double patenting rejections apply to the instantly claimed variety.
Lack of Written Description
The following is a quotation of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
Claim 21 remains rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for pre-AIA the inventor(s), at the time the application was filed, had possession of the claimed invention.
Claim 21 is drawn to tomato plants produced by processes that introduced at least one mutation in at least one target gene of tomato line NUN 00343 TOP without any upper limit to the number of mutations introduced to tomato line NUN 00343 TOP.
This means that plants sharing little genetic and phenotypic characteristics are included in the scope of the claims.
The instant disclosure describes a few characteristics and traits of NUN 00343 TOP (Tables 1-2).
These descriptions are insufficient, because there is not any limit on how dissimilar the resultant plants are from the deposited variety.
Given the broad scope of the claimed genus one of skill in the art would not have recognized that Applicant was in possession of the claimed genus at the time of filing.
Response to Arguments - Lack of Written Description
Applicant's arguments filed 29 July 2026 have been fully considered but they are not persuasive.
The claim still provides no upper limit for the number different traits allowed in the claimed modified plant.
Lack of Enablement
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
Claims 1, 3 remain rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the enablement requirement. The claims contain subject matter which was not described in the specification in such a way as to enable one skilled in the art to which it pertains, or with which it is most nearly connected, to make and/or use the invention.
The instant specification makes clear that NUN 00343 TOP is an F1 hybrid variety. Without access to the inbred parent lines, it is not possible to make a hybrid seed of NUN 00343 TOP. A screen capture of MPEP section 2401.01 is provided below which states that deposited material must be capable of self-replication. Accordingly, claims 1,3 are rejected under 35 U.S.C. 112(a) for lacking enablement.
PNG
media_image1.png
478
1506
media_image1.png
Greyscale
Response to Arguments – Enablement
Applicant's arguments filed 29 July 2026 have been fully considered but they are not persuasive.
Applicant urges that they will complete the deposit once the application is in condition for allowance. This still will not overcome the rejection. The enablement requirement is two-fold. It must allow a person to make and use the invention as claimed. Depositing hybrid seed will not allow anyone to make the claimed hybrid seed.
Conclusion
No claims are allowed. THIS ACTION IS MADE FINAL. Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a).
A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any extension fee pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to MATTHEW R KEOGH whose telephone number is (571)272-2960. The examiner can normally be reached M-Th 7-4:30, half day on Fridays.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Amjad Abraham can be reached on 571-270-7058. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/MATTHEW R KEOGH/Primary Examiner, Art Unit 1663
Prosecution Insights