DETAILED ACTION
Claims 1-3 and 6-10 have been examined.
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Specification
The amended title of the invention is objected to because “MACHINE” is misspelled, and also because it is not sufficiently descriptive given the amendments. The examiner recommends --CPU FOR EXECUTING A MEMORY COPY INSTRUCTION USING A STATE MACHINE AND SHARED REGISTER FILE PORTS--.
The amended abstract of the disclosure is objected to because of the following informalities:
In line 6, replace “in” with --In-- to properly start a new sentence.
A corrected abstract of the disclosure is required and must be presented on a separate sheet, apart from any other text. See MPEP § 608.01(b).
The lengthy substitute specification has not been checked to the extent necessary to determine the presence of all possible minor errors. Applicant’s cooperation is requested in correcting any errors of which applicant may become aware in the specification.
The substitute disclosure is objected to because of the following informalities:
Applicant has deleted a paragraph number causing all numbers to shift. See the last paragraph on page 14, which is no longer numbered. Please reinsert the number.
In paragraph 24, lines 1-3 (and similarly paragraph 59 (as incorrectly labeled)), the examiner does not understand how a vacant bit could be compared to 2N bytes such that it is either less than or not less than 2N. A vacant bit is a single bit, which is always less than any number of bytes.
In paragraph 24, last line, replace “2N” with --2N-- to match paragraphs 15 and 59.
In paragraph 47, the last two lines are unclear. What does it mean for information to be the end address of the source address?
Appropriate correction is required.
A substitute specification excluding the claims is required pursuant to 37 CFR 1.125(a) because of all of the issue pointed out thus far and due to improper numbering of paragraphs.
A substitute specification must not contain new matter. The substitute specification must be submitted with markings showing all the changes relative to the immediate prior version of the specification of record. The text of any added subject matter must be shown by underlining the added text. The text of any deleted matter must be shown by strike-through except that double brackets placed before and after the deleted characters may be used to show deletion of five or fewer consecutive characters. The text of any deleted subject matter must be shown by being placed within double brackets if strike-through cannot be easily perceived. An accompanying clean version (without markings) and a statement that the substitute specification contains no new matter must also be supplied. Numbering the paragraphs of the specification of record is not considered a change that must be shown.
Drawings
Replacement FIGs.1-3 are objected to for failing to comply with 37 CFR 1.84(t), which requires that drawing sheet numbers be placed in the middle of the top of the sheet, but not in the margin. From 37 CFR 1.84(f), the top of the sheet is regarded as one of the shorter sides. Applicant's sheet numbers incorrectly appear at the bottom. The sheet numbers should also appear as “1/3”, “2/3”, and “3/3”.
Replacement FIGs.1 and 3 are objected to for failing to comply with 37 CFR 1.84(p)(3), which states that “Numbers, letters, and reference characters…should not be placed in the drawing so as to interfere with its comprehension. Therefore, they should not cross or mingle with the lines.” For instance, in FIG.1, the text in the oval(s) within the Memory copy controller overlaps various lines, as does other text in FIGs.1 and 3 (e.g. “address” appears to be obscuring “OP1” within the Adder; and, in the general-purpose register, text should be fully within the border. Also, “DAIDX” overlaps a line as well).
The examiner generally recommends improving the quality of the replacement drawings. The words/lines are a bit fuzzy/wavy. See 37 CFR 1.84(a)(2) and (L).
The replacement drawings are not in compliance with 37 CFR 1.121(d) and 1.84 because they must be labeled with “Replacement Sheet”.
Replacement FIGs.1 and 3 are objected to because of the following minor informalities:
It is not clear why some of the arrowheads exist. For instance, in FIG.1, the instruction decoder has three lines at the top with down arrows. However, based on the way selectors work, the examiner questions how data could be received from the first selector. It seems as if data would only flow from the decoder to the first selector and not the reverse. Please clarify.
Applicant should be showing buses/connections as opposed to just the words describing the buses. For instance, in FIG.1, the examiner believes that “Read address” occupies a location where the bus would actually be connected to the Comparator. A similar issue exists with “End address”. For clarity, all connections should be shown and be labeled in a clear way.
Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Please ensure any replacement is in only black and white to avoid pixelation and further objection. The figure or figure number of an amended drawing should not be labeled as “amended.” Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Claim Objections
Claim 1 is objected to because of the following informalities:
On page 2, line 7, insert --a-- before “memory copy” for improved grammar.
On page 2, line 8, the “wherein…” limitation appears to be redundant based on page 1, lines 12 and 18, and page 2, line 1. Unless applicant wants to claim
--only-- in front of each of the first three instances of “one” in line 8 on page 2, applicant should delete this limitation such that the paragraph starts with
--wherein one write port…--.
On page 2, lines 8-9, it appears that “one write port” should be changed to --the write port-- to tie the port to that on page 2, lines 2-3. This will also provide antecedent basis for “the write port” on page 2, lines 15-16, as right now, this could refer to the write port of page 2, line 2, or page 2, lines 9-10.
On page 2, line 9, insert --an-- before “updated” for improved grammar.
On page 2, line 10, insert --updated-- before “target” for further clarity.
On page 2, line 12, insert --a-- before “current” for improved grammar.
On page 2, line 12, insert --current-- before “target” for further clarity.
On page 2, line 14, insert --of the first selector-- after “control end” for further clarity.
On page 2, line 15, insert --of the first selector-- after “output terminal” for further clarity.
On page 2, the “wherein…” in line 16 should start a new paragraph, and the last line should be appended to the end of this new paragraph. In other words, the last paragraph should be --wherein, in the read state,…; and, in the write state,…--. Alternatively, applicant may have three separate “wherein” paragraphs, where the read state paragraph is the 2nd to last paragraph, and the write state paragraph is the last paragraph.
Claim 2 is objected to because of the following informalities:
Replace “M2” with --2M--, which is more conventional notation.
Claim 6 is objected to because of the following informalities:
There is a lack of basis for each instance of “the valid memory copy instruction” because there are two instances of such an instruction in claim 1 (page 1, lines 7 and 14). It appears that applicant should replace “a valid” with --the valid-- on page 1, line 14.
On page 4, line 5, insert --file-- after “register”.
On page 4, line 7, delete “and”.
In line 15, move “and” to the end of line 14.
In lines 16 and 18, it appears that --the-- should be inserted before “memory copy” to tied to the memory copy of claim 1.
In the last line, “data at least one data item” is grammatically incorrect and must be reworded.
Claim 9 is objected to because of the following informalities:
On page 5, line 2, and in the last line, it appears that --the-- should be inserted before “memory copy” to tied to the memory copy of claim 1.
Claim 10 is objected to because of the following informalities:
On page 6, line 14, insert --file-- after “register”.
In line 16, move “and” to the end of line 15.
In line 17, there is a lack of basis for “the memory copy instruction”. Does applicant mean --the current memory copy instruction-- (from line 14)?
Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 9-10 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention.
Referring to claim 9, applicant now pre-judges whether a read operation is finished as opposed to about to be finished. Applicant also now performs the allowing and executing when the read operation is finished as opposed to about to be finished. The examiner cannot find original support for these new limitations and applicant has not pointed to support in the specification/drawings. Please either delete the new matter or point the examiner to clear support.
Claim 10 is rejected due to its dependence on a claim lacking adequate written description.
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-3 and 6-10 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
The claims recite the following limitations for which there is a lack of antecedent basis:
In claim 1, each instance of --the general-purpose register file--. Please insert
--file-- after each instance of “register” on page 1, lines 6 and 10, and on page 2, lines 2, 3, and 6.
In claim 2, “the source address”. There is a source address, updated source address, and a current source address in claim 1, and it is not clear which is being referred to. Is the information relative to an initial starting address?
In claim 2, “the target address”. There is a target address, updated…target address, and a current…target address in claim 1, and it is not clear which is being referred to. Is the information relative to an initial target address?
In claim 6, instances of “the source address” and “the target address” for similar reasoning.
In claim 10, last line, “the memory copy”. There is a memory copy in claim 1 (e.g. p.2, line 7), claim 6 (at end), and claim 9 (line 15 and at end). Which is being referred to?
Claim 6 is indefinite because, on page 4, in lines 9-13, applicant reads data from a first source address, stores the data in the buffer, and then writes the data in the buffer to a first target address in sequence according to…first-in, first-out (FIFO). The use of “in sequence…according to…FIFO” is not clear given that the claim is only reading and writing one data item. To have a sequence or FIFO, there would need to be multiple data items, but such are not claimed. Thus, it is not clear how “in sequence” and “FIFO” are intended to be interpreted when there is only one data item being claimed.
In claim 10, there is a lack of antecedent basis for “the remaining memory copy”. Does applicant mean --a remaining portion of memory copy--?
All dependent claims are rejected due to their dependence on an indefinite claim.
Allowable Subject Matter
Claims 1-3 and 6-10 are allowed over the prior art.
Conclusion
Applicant's amendment necessitated the new ground(s) of rejection presented in this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP § 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a).
A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to David J. Huisman whose telephone number is 571-272-4168. The examiner can normally be reached on Monday-Friday, 9:00 am-5:30 pm.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Jyoti Mehta, can be reached at 571-270-3995. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/David J. Huisman/Primary Examiner, Art Unit 2183