Prosecution Insights
Prosecution Insights
8 pending office actions • 6 art units • 8 examiners • 0 of 8 (0%) have an AI response strategy ready
Based on the USPTO statutory response window for each pending office action. 8 of the docket's apps have a known mailing date; the rest are excluded from the tile counts.
Every pending office action with a known statutory deadline, placed on a days-until-due axis. Dots left of Today are overdue; the further right, the more runway. Cases that share a deadline window stack vertically. 8 of the docket's apps have a known mailing date.
Difficulty is derived from the rejection statutes on the most recent pending office action. §101-driven and multi-statute cases are graded Hard; §112-only and obviousness-type double-patenting cases are graded Easy; everything else is Medium. "Unknown" means we have not yet parsed a statute for that office action.
| Bucket | Cases |
|---|---|
| §103 only | 7 (88%) |
| No statute on record | 1 (12%) |
How the docket's pending cases split across USPTO tech-center bands.
Manual office-action response work runs about 10 hours per case. The time-saved bands below show what IP Author's prosecution pipeline typically delivers — a conservative 20% on the low end, 35% in the middle, 50% on the high end.
| Examiner | Apps on this docket | Allow rate | Interview lift |
|---|---|---|---|
| VAN SELL, NATHAN L | 1 | 53.8% | +24.3% |
| BUTTNER, DAVID J | 1 | 63.9% | +4.1% |
| BOYER, CHARLES I | 1 | 70.8% | +18.9% |
| WU, ANDREA | 1 | 70.9% | +26.1% |
| MIGGINS, MICHAEL C | 1 | 80.7% | +16.5% |
| CHIDIAC, NICHOLAS J | 1 | 53.5% | +34.8% |
| KHATRI, PRASHANT J | 1 | 60.7% | +28.8% |
| NGUYEN, HAIDUNG D | 1 | 65.1% | +28.1% |
Cases in front of an examiner with an allow rate of 80%+ where the difficulty is Easy or Medium. The top 1 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18019502 | RESIN PELLET, METHOD OF ITS MANUFACTURING, AND MOLDED PRODUCT THEREOF | MIGGINS, MICHAEL C | 16d |
Cases in front of an examiner whose interview lift is 10 percentage points or more — i.e. interviewed cases historically resolve more favorably than non-interviewed ones. The top 7 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18013595 | MOLD PART USED FOR INJECTION MOLDING OF THERMOPLASTIC RESIN AND INJECTION MOLDING METHOD OF THERMOPLASTIC RESIN | CHIDIAC, NICHOLAS J | 87d overdue |
| 18035700 | FLUORINE-BASED SOLVENT COMPOSITION | BOYER, CHARLES I | 73d overdue |
| 17436124 | SOLVENT FOR GAS CHROMATOGRAPY MASS SPECTOMETRY, AND METHOD FOR DETERMINATION OF FLUORINE-CONTAINING SUBSTANCES ON THE SURFACE OF FLUORORESIN MELT-MOLDED PRODUCTS | NGUYEN, HAIDUNG D | 66d overdue |
| 17923966 | POROUS MEMBRANE OF POLYTETRAFLUOROETHYLENE AND/OR MODIFIED POLYTETRAFLUOROETHYLENE HAVING HIGH STRENGTH AND SMALL PORE DIAMETER | KHATRI, PRASHANT J | 32d overdue |
| 18278026 | POWDER COATING COMPOSITION | VAN SELL, NATHAN L | 28d overdue |
| 18019502 | RESIN PELLET, METHOD OF ITS MANUFACTURING, AND MOLDED PRODUCT THEREOF | MIGGINS, MICHAEL C | 16d |
| 18026884 | COMPRESSION MOLDING COMPOSITION, METHOD FOR PRODUCING THE SAME, AND MOLDED PRODUCT | WU, ANDREA | 62d |
| Art Unit | Apps |
|---|---|
| 1783 | 2 |
| 1761 | 2 |
| 1765 | 1 |
| 1763 | 1 |
| 1782 | 1 |
| 1744 | 1 |
| App # | Title | Examiner | Art Unit | Statutes | Status | Due in | AI | Filed |
|---|---|---|---|---|---|---|---|---|
| 18278026 | POWDER COATING COMPOSITION | VAN SELL, NATHAN L | 1783 | §103 | Final Rejection | 28d overdue | Pending | Aug 21, 2023 |
| 18039847 | FLUORORESIN | BUTTNER, DAVID J | 1765 | Other | Non-Final OA | 58d overdue | Pending | Jun 01, 2023 |
| 18035700 | FLUORINE-BASED SOLVENT COMPOSITION | BOYER, CHARLES I | 1761 | §103 | Final Rejection | 73d overdue | Pending | May 05, 2023 |
| 18026884 | COMPRESSION MOLDING COMPOSITION, METHOD FOR PRODUCING THE SAME, AND MOLDED PRODUCT | WU, ANDREA | 1763 | §103 | Non-Final OA | 62d | Pending | Mar 17, 2023 |
| 18019502 | RESIN PELLET, METHOD OF ITS MANUFACTURING, AND MOLDED PRODUCT THEREOF | MIGGINS, MICHAEL C | 1782 | §103 | Final Rejection | 16d | Pending | Feb 03, 2023 |
| 18013595 | MOLD PART USED FOR INJECTION MOLDING OF THERMOPLASTIC RESIN AND INJECTION MOLDING METHOD OF THERMOPLASTIC RESIN | CHIDIAC, NICHOLAS J | 1744 | §103 | Final Rejection | 87d overdue | Pending | Dec 29, 2022 |
| 17923966 | POROUS MEMBRANE OF POLYTETRAFLUOROETHYLENE AND/OR MODIFIED POLYTETRAFLUOROETHYLENE HAVING HIGH STRENGTH AND SMALL PORE DIAMETER | KHATRI, PRASHANT J | 1783 | §103 | Non-Final OA | 32d overdue | Pending | Nov 08, 2022 |
| 17436124 | SOLVENT FOR GAS CHROMATOGRAPY MASS SPECTOMETRY, AND METHOD FOR DETERMINATION OF FLUORINE-CONTAINING SUBSTANCES ON THE SURFACE OF FLUORORESIN MELT-MOLDED PRODUCTS | NGUYEN, HAIDUNG D | 1761 | §103 | Final Rejection | 66d overdue | Pending | Sep 03, 2021 |
IP Author helps IP teams respond to office actions faster with AI-generated responses, examiner analytics, and prosecution intelligence.
Start Free Trial