Prosecution Insights
Prosecution Insights
13 pending office actions • 10 art units • 13 examiners • 0 of 13 (0%) have an AI response strategy ready • 17 patents granted in the last 365 days
Based on the USPTO statutory response window for each pending office action. 13 of the docket's apps have a known mailing date; the rest are excluded from the tile counts.
Every pending office action with a known statutory deadline, placed on a days-until-due axis. Dots left of Today are overdue; the further right, the more runway. Cases that share a deadline window stack vertically. 13 of the docket's apps have a known mailing date.
Difficulty is derived from the rejection statutes on the most recent pending office action. §101-driven and multi-statute cases are graded Hard; §112-only and obviousness-type double-patenting cases are graded Easy; everything else is Medium. "Unknown" means we have not yet parsed a statute for that office action.
| Bucket | Cases |
|---|---|
| §103 only | 12 (92%) |
| §112 only | 1 (8%) |
How the docket's pending cases split across USPTO tech-center bands.
Manual office-action response work runs about 10 hours per case. The time-saved bands below show what IP Author's prosecution pipeline typically delivers — a conservative 20% on the low end, 35% in the middle, 50% on the high end.
| Examiner | Apps on this docket | Allow rate | Interview lift |
|---|---|---|---|
| SULTANA, NAHIDA | 1 | 78.2% | +8.5% |
| ROY, DEBJANI | 1 | 74.6% | +15.2% |
| MOTT, ADAM R | 1 | 74.9% | +22.4% |
| GRAHAM, ANDREW D | 1 | 59.7% | +21.9% |
| WILLIAMS, CEDRICK S | 1 | 58.7% | +27.1% |
| SONG, INJA | 1 | 65.5% | +48.1% |
| NELSON, JAMEL M | 1 | 73.6% | +15.9% |
| BLEDSOE, JOSHUA CALEB | 1 | 42.5% | +47.2% |
| EVANGELISTA, THEODORE JUSTINE | 1 | 66.7% | +17.1% |
| TRAN, THIEN S | 1 | 71.6% | +23.9% |
Cases in front of an examiner whose interview lift is 10 percentage points or more — i.e. interviewed cases historically resolve more favorably than non-interviewed ones. The top 8 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18776803 | Modular Frame for Multi-Axis Motion System | MOTT, ADAM R | 146d overdue |
| 18768361 | Stereolithography System with Parallel Processing Between Layer Formation and Selective Curing | GRAHAM, ANDREW D | 81d overdue |
| 18753010 | Stereolithography Apparatus for Improving Localized Planarity of a Transparent Sheet | SONG, INJA | 60d overdue |
| 18636353 | Rotational Stereolithography for Arcuate 3D Articles | NELSON, JAMEL M | 56d overdue |
| 18122524 | SYSTEMS AND METHODS FOR NON-CONTINUOUS DEPOSITION OF A COMPONENT | TRAN, THIEN S | 38d overdue |
| 18184946 | AS-DEPOSITED DATA MODEL FOR DIRECTING MACHINING AFTER ADDITIVE MANUFACTURING | EVANGELISTA, THEODORE JUSTINE | 24d overdue |
| 18758614 | METHOD AND COMPOSITION FOR REDEPLOYING A POLYMER FEEDSTOCK | WILLIAMS, CEDRICK S | 18d overdue |
| 18800637 | Three-Dimensional Printing System with Build Area That is Larger than a Build Plane | ROY, DEBJANI | 4d overdue |
| Art Unit | Apps |
|---|---|
| 1743 | 2 |
| 1744 | 2 |
| 3761 | 2 |
| 1741 | 1 |
| 3657 | 1 |
| 1742 | 1 |
| 1749 | 1 |
| 1762 | 1 |
| 1617 | 1 |
| 1799 | 1 |
| App # | Title | Examiner | Art Unit | Statutes | Status | Due in | AI | Filed |
|---|---|---|---|---|---|---|---|---|
| 18935811 | PHASE CHANGE INK PRINTING SYSTEM UTILIZING A COMPOSITE WAVEFORM | SULTANA, NAHIDA | 1743 | §103 | Non-Final OA | 27d | Pending | Nov 04, 2024 |
| 18800637 | Three-Dimensional Printing System with Build Area That is Larger than a Build Plane | ROY, DEBJANI | 1741 | §103 | Non-Final OA | 4d overdue | Pending | Aug 12, 2024 |
| 18776803 | Modular Frame for Multi-Axis Motion System | MOTT, ADAM R | 3657 | §103 | Non-Final OA | 146d overdue | Pending | Jul 18, 2024 |
| 18768361 | Stereolithography System with Parallel Processing Between Layer Formation and Selective Curing | GRAHAM, ANDREW D | 1742 | §103 | Non-Final OA | 81d overdue | Pending | Jul 10, 2024 |
| 18758614 | METHOD AND COMPOSITION FOR REDEPLOYING A POLYMER FEEDSTOCK | WILLIAMS, CEDRICK S | 1749 | §103 | Non-Final OA | 18d overdue | Pending | Jun 28, 2024 |
| 18753010 | Stereolithography Apparatus for Improving Localized Planarity of a Transparent Sheet | SONG, INJA | 1744 | §112 | Non-Final OA | 60d overdue | Pending | Jun 25, 2024 |
| 18636353 | Rotational Stereolithography for Arcuate 3D Articles | NELSON, JAMEL M | 1743 | §103 | Non-Final OA | 56d overdue | Pending | Apr 16, 2024 |
| 18439042 | COMPOSITIONS COMPRISING AN ASPHALTITE ADDITIVE FOR ADDITIVE MANUFACTURING | BLEDSOE, JOSHUA CALEB | 1762 | §103 | Non-Final OA | 35d | Pending | Feb 12, 2024 |
| 18184946 | AS-DEPOSITED DATA MODEL FOR DIRECTING MACHINING AFTER ADDITIVE MANUFACTURING | EVANGELISTA, THEODORE JUSTINE | 3761 | §103 | Non-Final OA | 24d overdue | Pending | Mar 16, 2023 |
| 18122524 | SYSTEMS AND METHODS FOR NON-CONTINUOUS DEPOSITION OF A COMPONENT | TRAN, THIEN S | 3761 | §103 | Non-Final OA | 38d overdue | Pending | Mar 16, 2023 |
| 17949484 | CURABLE COMPOUNDS AND FORMULATIONS FOR BIOMEDICAL APPLICATIONS | PIPIC, ALMA | 1617 | §103 | Non-Final OA | 12d | Pending | Sep 21, 2022 |
| 17307880 | MICROCOSM BIO-SCAFFOLD AND APPLICATIONS THEREOF | ESPERON, NATHAN GREGORY | 1799 | §103 | Final Rejection | 57d | Pending | May 04, 2021 |
| 16899711 | POLYPROPYLENE-BASED PARTICLES FOR ADDITIVE MANUFACTURING | ZHAO, XIAO SI | 1744 | §103 | Non-Final OA | 103d overdue | Pending | Jun 12, 2020 |
IP Author helps IP teams respond to office actions faster with AI-generated responses, examiner analytics, and prosecution intelligence.
Start Free Trial