Prosecution Insights
Prosecution Insights
17 pending office actions • 11 art units • 17 examiners • 0 of 17 (0%) have an AI response strategy ready • 16 patents granted in the last 365 days
Based on the USPTO statutory response window for each pending office action. 17 of the docket's apps have a known mailing date; the rest are excluded from the tile counts.
Every pending office action with a known statutory deadline, placed on a days-until-due axis. Dots left of Today are overdue; the further right, the more runway. Cases that share a deadline window stack vertically. 17 of the docket's apps have a known mailing date.
Difficulty is derived from the rejection statutes on the most recent pending office action. §101-driven and multi-statute cases are graded Hard; §112-only and obviousness-type double-patenting cases are graded Easy; everything else is Medium. "Unknown" means we have not yet parsed a statute for that office action.
| Bucket | Cases |
|---|---|
| §101 only | 1 (6%) |
| §103 only | 12 (71%) |
| §112 only | 1 (6%) |
| No statute on record | 3 (18%) |
How the docket's pending cases split across USPTO tech-center bands.
Manual office-action response work runs about 10 hours per case. The time-saved bands below show what IP Author's prosecution pipeline typically delivers — a conservative 20% on the low end, 35% in the middle, 50% on the high end.
| Examiner | Apps on this docket | Allow rate | Interview lift |
|---|---|---|---|
| TENTONI, LEO B | 1 | 81.9% | +10.0% |
| NELSON, JAMEL M | 1 | 73.6% | +15.9% |
| NISULA, CHRISTINE XU | 1 | 40.5% | -11.6% |
| AMEEN, MOHAMMAD M | 1 | 76.9% | +19.4% |
| DARNELL, BAILEIGH K | 1 | 69.7% | +26.1% |
| ROSWELL, JESSICA MARIE | 1 | 52.1% | +36.5% |
| SANDERS, JOSHUA T | 1 | 74.6% | +35.7% |
| TANG, MICHAEL XUEFEI | 1 | 83.2% | +19.4% |
| WASHVILLE, JEFFREY D | 1 | 79.9% | -4.8% |
| SALVATORE, LYNDA | 1 | 63.9% | +19.2% |
Cases in front of an examiner with an allow rate of 80%+ where the difficulty is Easy or Medium. The top 1 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18786084 | METHOD FOR PRINTING THREE-DIMENSIONAL PARTS WITH CRYSTALLIZATION KINETICS CONTROL | TENTONI, LEO B | 20d |
Multi-statute / §101-driven matters, or cases in front of an examiner with an allow rate under 30%. The top 1 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18307455 | PRINT ACCURACY SCORE BASED ON 3D METROLOGY DATA | TANG, MICHAEL XUEFEI | 45d overdue |
Cases in front of an examiner whose interview lift is 10 percentage points or more — i.e. interviewed cases historically resolve more favorably than non-interviewed ones. The top 8 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18540535 | DETECTION AND USE OF PRINTER CONFIGURATION INFORMATION | SANDERS, JOSHUA T | 89d overdue |
| 18574350 | NOVEL URETHANE ACRYLATE COMPOSITION | ROSWELL, JESSICA MARIE | 46d overdue |
| 18307455 | PRINT ACCURACY SCORE BASED ON 3D METROLOGY DATA | TANG, MICHAEL XUEFEI | 45d overdue |
| 18646331 | 3D PRINTER WITH HEAD CARRIAGE WITH FILAMENT CUTTER AND REMOVABLE PRINT HEAD | DARNELL, BAILEIGH K | 18d overdue |
| 18786084 | METHOD FOR PRINTING THREE-DIMENSIONAL PARTS WITH CRYSTALLIZATION KINETICS CONTROL | TENTONI, LEO B | 20d |
| 18708318 | THERMOPLASTIC ELASTOMER POWDERS FOR ADDITIVE MANUFACTURING AND THE USE THEREOF | AMEEN, MOHAMMAD M | 23d |
| 18022761 | POLYAMIDE FILAMENTS FOR USE IN 3D PRINTING | SALVATORE, LYNDA | 27d |
| 18738271 | THERMAL CONTROL IN A STEREOLITHOGRAPHIC 3D PRINTER | NELSON, JAMEL M | 40d |
| Art Unit | Apps |
|---|---|
| 1743 | 4 |
| 1789 | 3 |
| 1742 | 2 |
| 1767 | 1 |
| 2119 | 1 |
| 2115 | 1 |
| 1766 | 1 |
| 1764 | 1 |
| 3761 | 1 |
| 1615 | 1 |
| App # | Title | Examiner | Art Unit | Statutes | Status | Due in | AI | Filed |
|---|---|---|---|---|---|---|---|---|
| 18786084 | METHOD FOR PRINTING THREE-DIMENSIONAL PARTS WITH CRYSTALLIZATION KINETICS CONTROL | TENTONI, LEO B | 1742 | §112 | Non-Final OA | 20d | Pending | Jul 26, 2024 |
| 18738271 | THERMAL CONTROL IN A STEREOLITHOGRAPHIC 3D PRINTER | NELSON, JAMEL M | 1743 | Other | Non-Final OA | 40d | Pending | Jun 10, 2024 |
| 18708682 | CERAMIC FEEDSTOCK FOR FUSION BARRIERS AND SUPPORT STRUCTURES USED IN ADDITIVE MANUFACTURING | NISULA, CHRISTINE XU | 1789 | §103 | Non-Final OA | 29d | Pending | May 09, 2024 |
| 18708318 | THERMOPLASTIC ELASTOMER POWDERS FOR ADDITIVE MANUFACTURING AND THE USE THEREOF | AMEEN, MOHAMMAD M | 1742 | §103 | Non-Final OA | 23d | Pending | May 08, 2024 |
| 18646331 | 3D PRINTER WITH HEAD CARRIAGE WITH FILAMENT CUTTER AND REMOVABLE PRINT HEAD | DARNELL, BAILEIGH K | 1743 | §103 | Non-Final OA | 18d overdue | Pending | Apr 25, 2024 |
| 18574350 | NOVEL URETHANE ACRYLATE COMPOSITION | ROSWELL, JESSICA MARIE | 1767 | Other | Non-Final OA | 46d overdue | Pending | Dec 27, 2023 |
| 18540535 | DETECTION AND USE OF PRINTER CONFIGURATION INFORMATION | SANDERS, JOSHUA T | 2119 | Other | Final Rejection | 89d overdue | Pending | Dec 14, 2023 |
| 18307455 | PRINT ACCURACY SCORE BASED ON 3D METROLOGY DATA | TANG, MICHAEL XUEFEI | 2115 | §101 | Non-Final OA | 45d overdue | Pending | Apr 26, 2023 |
| 18307354 | WATER DISPERSIBLE POLYMER FOR USE IN ADDITIVE MANUFACTURING | WASHVILLE, JEFFREY D | 1766 | §103 | Non-Final OA | 43d overdue | Pending | Apr 26, 2023 |
| 18022761 | POLYAMIDE FILAMENTS FOR USE IN 3D PRINTING | SALVATORE, LYNDA | 1789 | §103 | Non-Final OA | 27d | Pending | Feb 23, 2023 |
| 18018047 | POWDER COMPOSITION FOR ADDITIVE PROCESS AND PRINTED ARTICLES THEREOF | REUTHER, ARRIE L | 1764 | §103 | Final Rejection | 52d overdue | Pending | Jan 26, 2023 |
| 17997593 | EMITTER AND METHOD FOR PLASMA FUSING OF MATERIALS | TRAN-LE, THAO UYEN | 3761 | §103 | Non-Final OA | 4d overdue | Pending | Oct 31, 2022 |
| 17997414 | THREE-DIMENSIONALLY PRINTABLE ANTIVIRAL FILAMENT | PALENIK, JEFFREY T | 1615 | §103 | Final Rejection | 7d | Pending | Oct 28, 2022 |
| 17785884 | PROCESS FOR THE PRODUCTION OF A THREE-DIMENSIONAL GREEN BODY | AHMED ALI, MOHAMED K | 1743 | §103 | Final Rejection | 58d overdue | Pending | Jun 15, 2022 |
| 17768879 | A PROCESS FOR PRODUCING A THREE-DIMENSIONAL (3D) OBJECT EMPLOYING GRANULATES | CARPENTER, JOSHUA S | 1733 | §103 | Final Rejection | 72d | Pending | Apr 14, 2022 |
| 17649515 | OLED LIGHT SOURCE AND MULTI-MATERIAL MEMBRANE FOR VAT POLYMERIZATION PRINTER | ROBITAILLE, JOHN P | 1743 | §103 | Non-Final OA | 28d overdue | Pending | Jan 31, 2022 |
| 16967980 | MULTIPLE LAYER FILAMENT AND METHOD OF MANUFACTURING | CHANDHOK, JENNA N | 1789 | §103 | Non-Final OA | 99d overdue | Pending | Aug 06, 2020 |
IP Author helps IP teams respond to office actions faster with AI-generated responses, examiner analytics, and prosecution intelligence.
Start Free Trial