Prosecution Insights
Prosecution Insights
71 pending office actions • 14 art units • 37 examiners • 0 of 71 (0%) have an AI response strategy ready • 58 patents granted in the last 365 days
Based on the USPTO statutory response window for each pending office action. 26 of the docket's apps have a known mailing date; the rest are excluded from the tile counts.
Every pending office action with a known statutory deadline, placed on a days-until-due axis. Dots left of Today are overdue; the further right, the more runway. Cases that share a deadline window stack vertically. 26 of the docket's apps have a known mailing date.
Difficulty is derived from the rejection statutes on the most recent pending office action. §101-driven and multi-statute cases are graded Hard; §112-only and obviousness-type double-patenting cases are graded Easy; everything else is Medium. "Unknown" means we have not yet parsed a statute for that office action.
| Bucket | Cases |
|---|---|
| §103 only | 52 (73%) |
| §102 only | 4 (6%) |
| §112 only | 8 (11%) |
| Double-patenting only | 2 (3%) |
| No statute on record | 5 (7%) |
How the docket's pending cases split across USPTO tech-center bands.
Manual office-action response work runs about 10 hours per case. The time-saved bands below show what IP Author's prosecution pipeline typically delivers — a conservative 20% on the low end, 35% in the middle, 50% on the high end.
| Examiner | Apps on this docket | Allow rate | Interview lift |
|---|---|---|---|
| KRUPICKA, ADAM C | 8 | 62.0% | +27.1% |
| KOSHY, JOPHY STEPHEN | 5 | 63.6% | +39.2% |
| LA VILLA, MICHAEL EUGENE | 4 | 75.3% | +18.2% |
| OMORI, MARY I | 4 | 50.5% | +59.3% |
| WALCK, BRIAN D | 4 | 58.6% | +26.8% |
| LUK, VANESSA TIBAY | 4 | 54.3% | +26.7% |
| SHAMS, NAZMUN NAHAR | 3 | 80.7% | +17.7% |
| MERKLING, SALLY ANNE | 2 | 62.2% | +31.5% |
| WU, JENNY R | 2 | 63.3% | +16.1% |
| YANG, JIE | 2 | 62.1% | +19.4% |
Cases in front of an examiner with an allow rate of 80%+ where the difficulty is Easy or Medium. The top 3 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18568046 | AUSTENTIC STAINLESS STEEL AND MANUFACTURING METHOD THEREOF | SHAMS, NAZMUN NAHAR | — |
| 18268572 | PLATED STEEL SHEET FOR EXTERIOR PANEL, AND METHOD FOR MANUFACTURING SAME | SHAMS, NAZMUN NAHAR | — |
| 18268041 | WIRE ROD AND PART, HAVING IMPROVED DELAYED FRACTURE RESISTANCE, FOR USE IN BOLT AND METHOD FOR MANUFACTURING SAME | SHAMS, NAZMUN NAHAR | — |
Cases in front of an examiner whose interview lift is 10 percentage points or more — i.e. interviewed cases historically resolve more favorably than non-interviewed ones. The top 8 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18032328 | HIGH-STRENGTH STEEL STRIP HAVING EXCELLENT WORKABILITY, AND METHOD FOR MANUFACTURING SAME | KOSHY, JOPHY STEPHEN | 49d overdue |
| 18268557 | MARTENSITIC STAINLESS STEEL WITH IMPROVED STRENGTH AND CORROSION RESISTANCE, AND MANUFACTURING METHOD THEREFOR | MERKLING, SALLY ANNE | 46d overdue |
| 18868518 | HIGH-STRENGTH HOT-DIP GALVANIZED STEEL SHEET HAVING GOOD PLATING QUALITY, STEEL SHEET FOR PLATING, AND METHODS FOR MANUFACTURING SAME | KRUPICKA, ADAM C | 45d overdue |
| 18873508 | STEEL SHEET HAVING GOOD PLATING QUALITY AND MANUFACTURING METHOD THEREFOR | KRUPICKA, ADAM C | 44d overdue |
| 18870209 | PLATED STEEL SHEET FOR HOT PRESS FORMING, HAVING EXCELLENT PLATING QUALITY, STEEL SHEET AND MANUFACTURING METHOD THEREFOR | KRUPICKA, ADAM C | 44d overdue |
| 18036645 | HIGH YIELD RATIO AND HIGH STRENGTH STEEL SHEET HAVING EXCELLENT THERMAL STABILITY, AND MANUFACTURING METHOD THEREFOR | OMORI, MARY I | 4d overdue |
| 18688707 | PLATED STEEL SHEET HAVING EXCELLENT CORROSION RESISTANCE AND WHITENESS AND METHOD FOR MANUFACTURING SAME | LA VILLA, MICHAEL EUGENE | 7d |
| 18681688 | PLATED STEEL SHEET HAVING EXCELLENT CORROSION RESISTANCE ANDD SURFACE APPEARANCE AND METHOD FOR MANUFACTURING SAME | LA VILLA, MICHAEL EUGENE | 7d |
| Art Unit | Apps |
|---|---|
| 1784 | 20 |
| 1733 | 19 |
| 1738 | 13 |
| 1735 | 2 |
| 1732 | 1 |
| 3614 | 1 |
| 2852 | 1 |
| 3644 | 1 |
| 3635 | 1 |
| 3612 | 1 |
| App # | Title | Examiner | Art Unit | Statutes | Status | Due in | AI | Filed |
|---|---|---|---|---|---|---|---|---|
| 18995431 | FLASH BUTT JOINING MEMBER AND FLASH BUTT WELDING METHOD | SCHLEIS, DANIEL J | 1784 | §112 | Non-Final OA | — | Pending | Jan 16, 2025 |
| 19016248 | ZINC ALLOY-PLATED STEEL MATERIAL HAVING EXCELLENT CORROSION RESISTANCE AND SURFACE QUALITY, AND METHOD FOR PRODUCING SAME | LA VILLA, MICHAEL EUGENE | 1784 | §103 | Non-Final OA | — | Pending | Jan 10, 2025 |
| 18873508 | STEEL SHEET HAVING GOOD PLATING QUALITY AND MANUFACTURING METHOD THEREFOR | KRUPICKA, ADAM C | 1784 | §103 | Final Rejection | 44d overdue | Pending | Dec 10, 2024 |
| 18873319 | PLATED STEEL SHEET FOR HOT PRESS FORMING HAVING EXCELLENT PLATING QUALITY, STEEL SHEET, AND RESPECTIVE METHODS FOR MANUFACTURING SAME | KRUPICKA, ADAM C | 1784 | §103 | Final Rejection | — | Pending | Dec 09, 2024 |
| 18870209 | PLATED STEEL SHEET FOR HOT PRESS FORMING, HAVING EXCELLENT PLATING QUALITY, STEEL SHEET AND MANUFACTURING METHOD THEREFOR | KRUPICKA, ADAM C | 1784 | §103 | Final Rejection | 44d overdue | Pending | Nov 27, 2024 |
| 18869793 | AUSTENITE STAINLESS STEEL AND MANUFACTURING METHOD THEREFOR | HAILEY, PATRICIA L | 1732 | §103 | Non-Final OA | — | Pending | Nov 26, 2024 |
| 18868518 | HIGH-STRENGTH HOT-DIP GALVANIZED STEEL SHEET HAVING GOOD PLATING QUALITY, STEEL SHEET FOR PLATING, AND METHODS FOR MANUFACTURING SAME | KRUPICKA, ADAM C | 1784 | §103 | Final Rejection | 45d overdue | Pending | Nov 22, 2024 |
| 18709375 | IMPACT REINFORCEMENT COMPONENT AND METHOD FOR MANUFACTURING SAME | O'NEILL, MATTHEW JAMES | 3614 | §112 | Final Rejection | 30d overdue | Pending | Nov 19, 2024 |
| 18577156 | PRINTING EQUIPMENT FOR METAL MATERIAL HAVING EXCELLENT PRINT QUALITY, PRINTING METHOD AND PRINTED METAL MATERIAL OBTAINED THEREFROM | ROTH, LAURA K | 2852 | §103 | Non-Final OA | — | Pending | Oct 10, 2024 |
| 18830214 | ALUMINUM-BASED PLATED STEEL PLATE FOR HOT PRESS HAVING EXCELLENT RESISTANCE AGAINST HYDROGEN DELAYED FRACTURE AND SPOT WELDABILITY, AND METHOD FOR MANUFACTURING SAME | OMORI, MARY I | 1784 | §103 | Non-Final OA | 28d | Pending | Sep 10, 2024 |
| 18838858 | HOT PRESS-FORMED PART AND MANUFACTURING METHOD THEREOF | CHRISTY, KATHERINE A | 1784 | §103 | Final Rejection | 10d overdue | Pending | Aug 15, 2024 |
| 18722239 | AUSTENITIC WELDED STEEL TUBE HAVING WEAR RESISTANCE AND MANUFACTURING METHOD FOR SAME | GRAY, PAUL J | — | §103 | Non-Final OA | — | Pending | Jun 20, 2024 |
| 18719157 | COLD-ROLLED STEEL SHEET HAVING EXCELLENT STRENGTH AND ELONGATION AND METHOD FOR MANUFACTURING SAME | MERKLING, SALLY ANNE | — | §103 | Non-Final OA | — | Pending | Jun 12, 2024 |
| 18718754 | FLOATING STRUCTURE AND WIND POWER GENERATION APPARATUS | DAVIS, RICHARD G | 3644 | — | Non-Final OA | — | Pending | Jun 11, 2024 |
| 18716496 | STAINLESS STEEL FOR FUEL CELL SEPARATOR AND MANUFACTURING METHOD THEREOF | LA VILLA, MICHAEL EUGENE | 1784 | §103 | Final Rejection | — | Pending | Jun 04, 2024 |
| 18715902 | GRAPHITE STEEL WIRE ROD AND GRAPHITE STEEL FOR TV PEM NUT PARTS, METHODS FOR MANUFACTURING AND CUTTING THEREFOR | WU, JENNY R | — | §103 | Non-Final OA | — | Pending | Jun 03, 2024 |
| 18713520 | HOT ROLLED STEEL SHEET FOR GROUND REINFORCEMENT AND STEEL PIPE FOR GROUND REINFORCEMENT, AND MANUFACTURING METHODS THEREOF | YANG, JIE | — | §103 | Non-Final OA | — | Pending | May 24, 2024 |
| 18712129 | HOT-ROLLED STEEL SHEET AND METHOD FOR MANUFACTURING SAME | YANG, JIE | — | — | Non-Final OA | — | Pending | May 21, 2024 |
| 18646241 | ADVANCED HIGH STRENGTH ZINC PLATED STEEL SHEET HAVING EXCELLENT SURFACE QUALITY AND ELECTRICAL RESISTANCE SPOT WELDABILITY AND MANUFACTURING METHOD THEREOF | MCGUTHRY BANKS, TIMA MICHELE | — | DP | Non-Final OA | — | Pending | Apr 25, 2024 |
| 18703081 | STEEL PLATE HAVING HIGH STRENGTH AND EXCELLENT LOW-TEMPERATURE IMPACT TOUGHNESS, AND METHOD FOR MANUFACTURING SAME | KOSHY, JOPHY STEPHEN | 1733 | DP | Non-Final OA | — | Pending | Apr 19, 2024 |
| 18696206 | HOT-ROLLED FERRITIC STAINLESS STEEL SHEET HAVING EXCELLENT FORMABILITY AND METHOD FOR MANUFACTURING SAME | LIANG, ANTHONY M | — | §112 | Non-Final OA | — | Pending | Mar 27, 2024 |
| 18694191 | STEEL MATERIAL FOR HOT FORMING, HOT FORMED PART, AND METHOD FOR MANUFACTURING THEREOF | ZHENG, LOIS L | 1733 | §103 | Final Rejection | — | Pending | Mar 21, 2024 |
| 18688707 | PLATED STEEL SHEET HAVING EXCELLENT CORROSION RESISTANCE AND WHITENESS AND METHOD FOR MANUFACTURING SAME | LA VILLA, MICHAEL EUGENE | 1784 | §112 | Final Rejection | 7d | Pending | Mar 01, 2024 |
| 18687154 | TUBE STRUCTURE | NGUYEN, CHI Q | 3635 | §103 | Final Rejection | 46d overdue | Pending | Feb 27, 2024 |
| 18681688 | PLATED STEEL SHEET HAVING EXCELLENT CORROSION RESISTANCE ANDD SURFACE APPEARANCE AND METHOD FOR MANUFACTURING SAME | LA VILLA, MICHAEL EUGENE | 1784 | §112 | Final Rejection | 7d | Pending | Feb 06, 2024 |
| 18681397 | STEEL MATERIAL HAVING HIGH STRENGTH AND EXCELLENT IMPACT TOUGHNESS, AND MANUFACTURING METHOD THEREFOR | WALCK, BRIAN D | 1738 | §103 | Non-Final OA | — | Pending | Feb 05, 2024 |
| 18580943 | AUSTENITIC STAINLESS STEEL AND METHOD FOR MANUFACTURING SAME | CARDA, DANIELLE MARIE | 1738 | §103 | Non-Final OA | — | Pending | Jan 19, 2024 |
| 18578672 | HIGH-STRENGTH STEEL SHEET HAVING EXCELLENT HOLE EXPANDABILITY AND DUCTILITY AND MANUFACTURING METHOD THEREFOR | WALCK, BRIAN D | 1738 | §103 | Non-Final OA | — | Pending | Jan 11, 2024 |
| 18575125 | STAINLESS STEEL HAVING EXCELLENT CONTACT RESISTANCE OR PEMFC SEPARATOR AN METHOD OF MANUFACTURING SAME | CARDA, DANIELLE MARIE | 1738 | §102 | Non-Final OA | — | Pending | Dec 28, 2023 |
| 18574624 | SIDE SILL FOR VEHICLE | PAPE, JOSEPH | 3612 | §103 | Final Rejection | 9d overdue | Pending | Dec 27, 2023 |
| 18570960 | SIDE SILL FOR VEHICLE | LYNCH, CARLY W | 3643 | §103 | Non-Final OA | 56d | Pending | Dec 15, 2023 |
| 18570064 | ULTRA HIGH STRENGTH STEEL SHEET HAVING HIGH YIELD RATIO AND EXCELLENT BENDABILITY AND METHOD OF MANUFACTURING SAME | CARPENTER, JOSHUA S | 1733 | §103 | Non-Final OA | — | Pending | Dec 13, 2023 |
| 18568046 | AUSTENTIC STAINLESS STEEL AND MANUFACTURING METHOD THEREOF | SHAMS, NAZMUN NAHAR | 1738 | §102 | Non-Final OA | — | Pending | Dec 07, 2023 |
| 18568246 | AUSTENITIC STAINLESS STEEL AND MANUFACTURING METHOD THEREOF | O'KEEFE, SEAN P | 1738 | §103 | Non-Final OA | — | Pending | Dec 07, 2023 |
| 18567663 | HIGHLY CORROSION-RESISTANT PLATED STEEL SHEET HAVING EXCELLENT CORROSION RESISTANCE AND SURFACE QUALITY, AND MANUFACTURING METHOD THEREFOR | WANG, XIAOBEI | 1784 | §112 | Non-Final OA | 46d | Pending | Dec 06, 2023 |
| 18566072 | ULTRAHIGH-STRENGTH STEEL SHEET WITH EXCELLENT BENDABILITY AND STRETCH FLANGEABILITY, AND MANUFACTURING METHOD THEREFOR | MORALES, RICARDO D | 1738 | §112 | Non-Final OA | — | Pending | Nov 30, 2023 |
| 18268425 | NON-ORIENTED ELECTRICAL STEEL SHEET AND METHOD FOR MANUFACTURING SAME | JANSSEN, REBECCA | 1733 | §103 | Non-Final OA | — | Pending | Oct 27, 2023 |
| 18288286 | NON-ORIENTED ELECTRICAL STEEL SHEET AND METHOD FOR MANUFACTURING SAME | WANG, XIAOBEI | 1784 | §103 | Final Rejection | 5d overdue | Pending | Oct 25, 2023 |
| 18287977 | NON-ORIENTED ELECTRICAL STEEL SHEET AND METHOD FOR MANUFACTURING SAME | STILES, JACOB BENJAMIN | 1733 | §103 | Non-Final OA | — | Pending | Oct 23, 2023 |
| 18375764 | HOT PRESS-FORMED MEMBER HAVING EXCELLENT CRACK PROPAGATION RESISTANCE AND DUCTILITY, AND METHOD FOR PRODUCING SAME | WALCK, BRIAN D | 1738 | §103 | Non-Final OA | — | Pending | Oct 02, 2023 |
| 18284767 | PROCESSING METHOD FOR REUSING WASTE BATTERY | KEKIA, OMAR M | 1722 | — | Non-Final OA | — | Pending | Sep 28, 2023 |
| 18023553 | A METHOD FOR PRODUCING LITHIUM HYDROXIDE FROM LITHIUM-CONTAINING RAW MATERIAL | SPEER, JOSHUA MAXWELL | 1738 | §103 | Non-Final OA | 76d | Pending | Aug 25, 2023 |
| 18268441 | GRAIN-ORIENTED ELECTRICAL STEEL SHEET AND MANUFACTURING METHOD THEREFOR | SU, XIAOWEI | 1733 | §103 | Final Rejection | — | Pending | Jul 11, 2023 |
| 18268806 | ELECTRICAL STEEL SHEET, AND ELECTRICAL STEEL SHEET LAMINATE | RICE, STEVEN | 1787 | §103 | Final Rejection | 7d | Pending | Jun 21, 2023 |
| 18268584 | GRAIN-ORIENTED ELECTRICAL STEEL SHEET, AND MANUFACTURING METHOD THEREFOR | LUK, VANESSA TIBAY | 1733 | §103 | Final Rejection | — | Pending | Jun 20, 2023 |
| 18268572 | PLATED STEEL SHEET FOR EXTERIOR PANEL, AND METHOD FOR MANUFACTURING SAME | SHAMS, NAZMUN NAHAR | 1738 | §103 | Final Rejection | — | Pending | Jun 20, 2023 |
| 18268557 | MARTENSITIC STAINLESS STEEL WITH IMPROVED STRENGTH AND CORROSION RESISTANCE, AND MANUFACTURING METHOD THEREFOR | MERKLING, SALLY ANNE | 1738 | §103 | Final Rejection | 46d overdue | Pending | Jun 20, 2023 |
| 18268388 | COLD-ROLLED STEEL SHEET HAVING EXCELLENT PROCESSABILITY AND MANUFACTURING METHOD THEREOF | KRUPICKA, ADAM C | 1784 | §103 | Non-Final OA | — | Pending | Jun 20, 2023 |
| 18268545 | NON-ORIENTED ELECTRICAL STEEL SHEET AND METHOD FOR MANUFACTURING SAME | LUK, VANESSA TIBAY | 1733 | §103 | Final Rejection | — | Pending | Jun 20, 2023 |
| 18268499 | AUSTENITIC HIGH MANGANESE STEEL FOR DISC BRAKE | WALCK, BRIAN D | 1738 | §103 | Final Rejection | — | Pending | Jun 20, 2023 |
| 18268041 | WIRE ROD AND PART, HAVING IMPROVED DELAYED FRACTURE RESISTANCE, FOR USE IN BOLT AND METHOD FOR MANUFACTURING SAME | SHAMS, NAZMUN NAHAR | 1738 | §103 | Final Rejection | — | Pending | Jun 16, 2023 |
| 18267660 | GRAIN ORIENTED ELECTRICAL STEEL SHEET AND METHOD FOR MANUFACTURING SAME | LUK, VANESSA TIBAY | 1733 | §103 | Final Rejection | 50d | Pending | Jun 15, 2023 |
| 18267556 | WIRE ROD AND STEEL WIRE FOR SPRING, SPRING WITH IMPROVED FATIGUE RESISTANCE AND NITRIDING PROPERTIES, AND METHODS FOR MANUFACTURING SAME | HEVEY, JOHN A | 1735 | §103 | Final Rejection | — | Pending | Jun 15, 2023 |
| 18267381 | HIGH STRENGTH HOT-DIP GALVANIZED STEEL SHEET HAVING EXCELLENT COATABILITY AND METHOD OF MANUFACTURING SAME | OMORI, MARY I | 1784 | §103 | Non-Final OA | 19d | Pending | Jun 14, 2023 |
| 18267084 | HIGH STRENGTH STEEL SHEET HAVING EXCELLENT WORKABILITY AND METHOD FOR MANUFACTURING SAME | HEVEY, JOHN A | 1735 | §103 | Final Rejection | 60d | Pending | Jun 13, 2023 |
| 18267014 | COMPOSITE STEEL SHEET HAVING EXCELLENT ADHESIVENESS, AND MANUFACTURING METHOD THEREFOR | OMORI, MARY I | 1784 | §103 | Final Rejection | — | Pending | Jun 13, 2023 |
| 18265511 | STEEL SHEET FOR PORCELAIN ENAMEL, AND METHOD OF MANUFACTURING SAME | KOSHY, JOPHY STEPHEN | 1733 | §112 | Non-Final OA | — | Pending | Jun 06, 2023 |
| 18265413 | HIGH STRENGTH PLATED STEEL SHEET HAVING EXCELLENT FORMABILITY AND SURFACE PROPERTY, AND METHOD FOR MANUFACTURING SAME | KRUPICKA, ADAM C | 1784 | §103 | Non-Final OA | — | Pending | Jun 05, 2023 |
| 18265345 | FERRITIC STAINLESS STEEL WITH IMPROVED RIDGING RESISTANCE AND ITS MANUFACTURING METHOD | KOSHY, JOPHY STEPHEN | 1733 | §102 | Final Rejection | — | Pending | Jun 05, 2023 |
| 18265108 | HOT-ROLLED STEEL SHEET FOR HYPER TUBE AND MANUFACTURING METHOD THEREFOR | KRUPICKA, ADAM C | 1784 | §103 | Final Rejection | — | Pending | Jun 02, 2023 |
| 18038757 | STEEL MATERIAL FOR SEISMIC DAMPER HAVING SUPERIOR IMPACT TOUGHNESS, AND MANUFACTURING METHOD FOR SAME | SU, XIAOWEI | 1733 | §103 | Final Rejection | — | Pending | May 25, 2023 |
| 18038914 | HIGH-STRENGTH HOT-DIP GALVANIZED STEEL SHEET HAVING EXCELLENT PLATING QUALITY, STEEL SHEET FOR PLATING, AND METHODS FOR MANUFACTURING SAME | KRUPICKA, ADAM C | 1784 | §103 | Final Rejection | — | Pending | May 25, 2023 |
| 18038389 | STAINLESS STEEL FOR FUEL CELL SEPARATOR WITH EXCELLENT SURFACE HYDROPHILICITY AND ELECTRICAL CONDUCTIVITY, AND MANUFACTURING METHOD THEREOF | CARPENTER, JOSHUA S | 1733 | Other | Non-Final OA | 11d overdue | Pending | May 23, 2023 |
| 18037473 | HIGH-STRENGTH AUSTENITIC STAINLESS STEEL WITH EXCELLENT HOT WORKABILITY | KOSHY, JOPHY STEPHEN | 1733 | Other | Non-Final OA | 34d | Pending | May 17, 2023 |
| 18037468 | HOT ROLLED STEEL HAVING LOW COMPRESSIVE STRENGTH LOSS AFTER BEING PROCESSED INTO STEEL PIPE, AND MANUFACTURING METHOD THEREFOR | WU, JENNY R | 1733 | §103 | Final Rejection | — | Pending | May 17, 2023 |
| 18036645 | HIGH YIELD RATIO AND HIGH STRENGTH STEEL SHEET HAVING EXCELLENT THERMAL STABILITY, AND MANUFACTURING METHOD THEREFOR | OMORI, MARY I | 1784 | §103 | Final Rejection | 4d overdue | Pending | May 11, 2023 |
| 18034951 | FERRITIC STAINLESS STEEL WITH IMPROVED STRENGTH, WORKABILITY, AND CORROSION RESISTANCE | ALDAZ CERVANTES, MAYELA RENATA | 1733 | §103 | Non-Final OA | — | Pending | May 02, 2023 |
| 18032977 | METHOD FOR MANUFACTURING TAILOR WELDED BLANK USING STEEL SHEET FOR HOT PRESSING HAVING AL-FE-BASED INTERMETALLIC ALLOY LAYER | LUK, VANESSA TIBAY | 1733 | §103 | Final Rejection | 75d | Pending | Apr 20, 2023 |
| 18032328 | HIGH-STRENGTH STEEL STRIP HAVING EXCELLENT WORKABILITY, AND METHOD FOR MANUFACTURING SAME | KOSHY, JOPHY STEPHEN | 1733 | §103 | Non-Final OA | 49d overdue | Pending | Apr 17, 2023 |
| 18027522 | SIDE FRAME FOR BATTERY CASE | CANTELMO, GREGG | 1725 | §102 | Non-Final OA | 45d overdue | Pending | Mar 21, 2023 |
| 17784514 | ANNEALING SEPARATOR COMPOSITION FOR GRAIN-ORIENTED ELECTRICAL STEEL SHEET, GRAIN-ORIENTED ELECTRICAL STEEL SHEET, AND MANUFACTURING METHOD THEREFOR | ALDAZ CERVANTES, MAYELA RENATA | 1733 | §103 | Non-Final OA | 49d | Pending | Aug 12, 2022 |
IP Author helps IP teams respond to office actions faster with AI-generated responses, examiner analytics, and prosecution intelligence.
Start Free Trial